Richpeace GARMENT CAD MARKER SYSTEM (GMS) v9.0

Home  /  News  /  Richpeace GARMENT CAD MARKER SYSTEM (GMS) v9.0

Checked by SENSELOCK Dongle Emulator
Checked by Sentinel SHK Dongle Emulator for Supernest

  •  Auto Nesting: High utilization marker can be done in a very short time. Dual interface work at the same time, allow operator to make a very effective nesting, improve the fabric utilization.
  •   Manual Nesting: Manually overlap the patterns pieces and fine tuning a little bit, plus fully utilize the fabric edges, can archieve better utilization. 
  • Cap Nesting: Tailor-made marker solution for toy, glove, cap, and underwear industries. 
  • Duplicate and reverse nesting: Duplicate with reverse the markers can achieve a higher utilization.
  • Associate: After adding notches on graded pieces, some internal modification or dimension changes taken place, it automatically update the completed marker, no need to make the marker again. It saves a lot of time.
  • And other...

  Auto Nesting: High utilization marker can be done in a very short time. Dual interface work at the same time, allow operator to make a very effective nesting, improve the fabric utilization.

  Manual Nesting: Manually overlap the patterns pieces and fine tuning a little bit, plus fully utilize the fabric edges, can archieve better utilization. 

 Cap Nesting: Tailor-made marker solution for toy, glove, cap, and underwear industries. 

 Duplicate and reverse nesting: Duplicate with reverse the markers can achieve a higher utilization.

Associate: After adding notches on graded pieces, some internal modification or dimension changes taken place, it automatically update the completed marker, no need to make the marker again. It saves a lot of time.

 Strip and plaid material nesting: In order to achieve a higher utilization, during the nesting process, fabric image can be scanned in, to assist the operator to make a better marker.

Show fabric pattern on marker.

Define Stripe and Plaid parameters in system.

 Able to read HPGL format from other sources: Able to import HPGL and auto cutter file, then generate a new marker layout.

  Cut plan: the most useful function for cutting room. Calculate fabric consumption and pieces quantity quickly. Increase productivity and fast reaction to market demand. Save time and money!

 Provide solution for cutting plan on single fabric or multiple fabrics, put cutting to exact quantities and match to purchase order requirement. 

  Precisely calculate the fabric consumption before actual ordering of fabrics, prevent the problem on extra fabric storage or shortage of fabric during production. 

 All data of calculated fabric consumption can be printed or saved to file. 

 Distinguish pieces per variety of fabric: transform to sub-marker per the variation of fabric uses, such as color of fabric or material of fabric. 

SUPERNEST

Supernest is international innovative technology. The system can automatically finish one lay of markers in a very short period, the fabric utilization can be or even highter than the manual nesting. Specially prevent the horizontal & vertical shading, an mixed shading problem. It is possible to process multiple marker jobs in queue, save time and improve productivity. 

  • Rotation and flip restrictions according to fabric.
  • Slop allowed
  • Available for bookfold & tubular marker
  • No restriction on number of pieces
  • Prevent horizontal color shading problem
  • Prevent vertical color shading problem




 

Request

Search
LPC Composer v4.0.2
TRUMPF TOPS100 v05.41.00_B001
TRUMPF TOPS300 v05.10.06
Possible generate any license configuration.

Bellview FUSION v7.45
License creation.

Ellipse SPT Software

PEPSE GT  08/02/02 v.6 (Gas turbine version) 

Ciba COLIBRI v3.2.4
Possible use license on ANY computers
Remove expitation date restriction
aSa

aSa v7.2
aSa Module: CAD/Detaling, Rebar Financials
Possible generate any license configuration.

Micro Map v5.0.0.5 x64 (build 20/06/2018)
Stereo HIT+ v5.0.0.5 x64 (build 20/06/2018)
GIS and Photogrammetric software
Possible include all modules.

dSPACE Release 6.2
Possible change license file options.

OrisDent 9001 Professional FULL v7.15 rel 881
StabiCAD V
BLANDED
Wind turbine design v4.6.0.64
NETCAD 5.0 GIS
Visual Window v1.0.0.1

Conductor v2.0 FULL
Possible change license edition.

Copyrights

This site was created and designed by Brain Studio.

Our sites:
http://www.brstudio.com
http://www.br-studio.biz

Our emails:
Glasha@brstudio.com
Glasha.GGS@gmail.com

Our chat:
ICQ: 93330024
Skype: Glasha_GGS


Only use these sites to obtain reliable information.

We are in no way associated with any other websites or emails.

Be careful!!! Do not fall for the bait scams.

Answer reaction

If you have not received a response to your request Email within 2-3 days, it is likely that our answers were your spam box.
Check your spam box and remove our email adress from here.